Application Instructions

• Make sure surface is disinfected and clean before applying.
• Insert trigger sprayer into SurfaceAid™ XL bottle.
• Spray a light coating evenly onto surface
• Allow the product to stand on the surface for at least three minutes.
• Wipe with clean cloth to redistribute residual liquid and minimize surface spotting.
• 24/7 antimicrobial protection for up to 30 days.

• For preparation and maintenance of surfaces with SurfaceAide treatment
• Insert trigger sprayer into SurfaceClean™ bottle
• Spray a light coating evenly onto surface to be cleaned or treated
• Allow the product to stand on the surface briefly.
• Wipe with clean cloth
• Regular use of SurfaceClean will help keep the germ fighting shield of SurfaceAide free of dirt and debris

Preparation

• Garments must be clean prior to application. If dirty, wash them prior to antimicrobial treatment.
• Application of FabricAide™ must be done separately from normal washing. Do no mix with regular detergent.

Application

• Pour entire contents of 4 oz. FabricAide sample into final rinse water of the washing cycle.
• Do not use in conjunction with any other laundry products.
• For front loaders, pours into dispenser for final rinse cycle.
• Dry garments as usual.
• 24/7 antimicrobial protection, odor eliminators and stain releasers for up to 30 washes.